The Java Platform defines five logical font names that every implementation must support: Serif, SansSerif, Monospaced, Dialog, and DialogInput. These logical font names are mapped to physical fonts in implementation dependent ways.
Sun's Java SE Runtime Environments use font configuration files to map logical font names to physical fonts. There are several files to support different mappings depending on the host operating system version. The files are located in the lib directory within the JRE installation. Users can edit or create their own font configuration files to adjust the mappings to their particular system setup. Note however that this is a modification of the JRE, and Sun does not support modified JREs.
Font configuration files come in two formats: A properties format and a binary format. The properties format is described in detail in this document and can be used for user-defined configurations. The binary format is undocumented and used only for the JRE's predefined configurations; the corresponding files in properties format are available for reference as files with the ".properties.src" extension.
Note that font configuration files are implementation dependent. Not all implementations of the Java Platform use them, and the format and content vary between different runtime environments as well as between releases. This document describes the format used by version 6 of Sun's Java SE Runtime Environments.
To find the appropriate font configuration file for a host operating system, the following information is used:
"98", "2000",
"Me", "XP", "2003"."Sun", "RedHat",
"Turbo", "SuSE".The runtime uses the first of the following files it finds:
JavaHome/lib/fontconfig.OS.Version.properties
JavaHome/lib/fontconfig.OS.Version.bfc
JavaHome/lib/fontconfig.OS.properties
JavaHome/lib/fontconfig.OS.bfc
JavaHome/lib/fontconfig.Version.properties
JavaHome/lib/fontconfig.Version.bfc
JavaHome/lib/fontconfig.properties
JavaHome/lib/fontconfig.bfc
Files with a ".properties" suffix are assumed to be properties
files as specified by the Properties
class and are loaded through that class. Files without this suffix
are assumed to be in binary format.
Throughout the font configuration files, a number of different names are used:
serif, sansserif,
monospaced, dialog, and
dialoginput. In font configuration files, these names
are always in lowercase.plain, bold, italic, and
bolditalic. Again, these names are always in
lowercase."Courier
New" or "\uad74\ub9bc"."-monotype-times new
roman-regular-r---*-%d-*-*-p-*-iso8859-1". Note that
"%d" is used for the font size - the actual font size
is filled in at runtime.java.nio.charset.Charset.defaultCharset().name().The version property identifies the font configuration format version. This document specifies version 1.
The complete property has the form:
version=1
Component font mapping properties describe which physical font to use to render characters from a given character subset with a given logical font in a given style.
The keys have the forms:
allfonts.CharacterSubsetName
LogicalFontName.StyleName.CharacterSubsetName
The first form is used if the same font is used for a character subset independent of logical font and style (in this case, the font rendering engines apply algorithmic styles to the font). The second form is used if different physical fonts are used for a character subset for different logical fonts and styles. In this case, properties must be specified for each combination of logical font and style, so 20 properties for one character subset. If a property of the first form is present for a character subset, then properties of the second form for the same character subset are ignored.
The values are platform font names, as described above.
Since the character subsets supported by given fonts often overlap, separate search sequence properties are used to define in which order to try the fonts when rendering a character.
The Java runtime uses sequence properties to determine search sequences for the five logical fonts. However, a font configuration file may specify properties that are specific to a combination of encoding, language, and country, and the runtime will then use a lookup to determine the search sequence property for each logical font.
The keys have the form:
sequence.allfonts.Encoding.Language.Countrysequence.LogicalFontName.Encoding.Language.Countrysequence.allfonts.Encoding.Languagesequence.LogicalFontName.Encoding.Languagesequence.allfonts.Encodingsequence.LogicalFontName.Encodingsequence.allfonts sequence.LogicalFontName
The allfonts forms are used if the sequence is used
for all five logical fonts. The forms specifying logical font names
are used if different sequences are used for different logical
fonts.
For each logical font, the Java runtime uses the property value with the first of the above keys. This property determines the primary search sequence for the logical font.
The file may also define a single fallback search sequence. The key for the fallback search sequence property is:
sequence.fallback
The values of all search sequence properties have the form:
SearchSequenceValue:
CharacterSubsetName
CharacterSubsetName , SearchSequenceValue
The primary search sequence properties specify character subset names for required fonts, which are used for both AWT and 2D font rendering. The fallback search sequence property gives character subset names for optional fonts, which are used as fallbacks for all logical fonts, but only for 2D font rendering. The runtime automatically adds the Lucida Sans Regular font as a fallback font for 2D rendering if it's not already specified. If the runtime environment has a directory lib/fonts/fallback and this directory contains valid TrueType or Type 1 fonts, the runtime automatically adds these fonts as fallback fonts for 2D rendering. On Windows, if there is a system EUDC (End User Defined Characters) font registered with Windows, the runtime automatically adds this font as well as a fallback font for 2D rendering.
The sequence properties determine in which sequence component fonts are tried to render a given character. For example, given the following properties:
sequence.monospaced=japanese,alphabetic sequence.fallback=korean monospaced.plain.alphabetic=Arial monospaced.plain.japanese=MSGothic monospaced.plain.korean=Gulim
the runtime will first attempt to render a character with the MSGothic font. If that font doesn't provide a glyph for the character, it will attempt the Arial font. For 2D rendering, it will also try the Gulim and the Lucida Sans Regular font as well as any TrueType or Type 1 fonts in the runtime's lib/fonts/fallback directory. For 2D rendering on Windows, if there is a system EUDC font registered with Windows, the runtime will finally try this EUDC font.
When calculating font metrics for a logical font without reference to a string, only the required fonts are taken into consideration. For the example above, the FontMetrics.getMaxDescent method would return results based on the MSGothic and Arial fonts, but not the Gulim and Lucida Sans fonts. In this way, simple user interface elements such as buttons, which sometimes calculate their size based on font metrics, are not affected by an extended list of component fonts which their labels usually don't use. On the other hand, text components typically calculate metrics based on the text they contain and thus will obtain correct results.
The sequence properties that the runtime obtains for the five logical fonts should list the same character subsets, but may list them in different order.
The exclusion range properties specify Unicode character ranges which should be excluded from being rendered with the fonts corresponding to a given character subset. This is used if a font with a large character repertoire needs to be placed early in the search sequence (for example, for performance reasons), but some characters that it supports should be drawn with a different font instead. These properties are optional, so there's at most one per character subset.
The keys have the form:
exclusion.CharacterSubsetName
The values have the form:
ExclusionRangeValue:
Range
Range , ExclusionRangeValue
Range:
Char - Char
Char:
HexDigit HexDigit HexDigit HexDigit
HexDigit HexDigit HexDigit HexDigit HexDigit HexDigit
A Char is a Unicode character represented as a hexadecimal value.
The proportional font properties describe the relationship between proportional and non-proportional variants of otherwise equivalent fonts. These properties are used to implement preferences specified by the GraphicsEnvironment.preferProportionalFonts method.
The keys have the form:
proportional.PlatformFontName
Space characters in the platform font name must be replaced with underscore characters ("_").
The values have the form:
PlatformFontName
In values, space characters are left unmodified.
Each property indicates that the font named in the value is the proportional equivalent of the font named in the key, and also that the font named in the key is the non-proportional equivalent of the font named in the value.
Font file name properties provide the names of the files containing the physical fonts used in the font configuration file. File names are required for all physical fonts on Windows and recommended for all physical fonts on Solaris and Linux.
The keys have the form:
filename.PlatformFontName
Space characters in the platform font name must be replaced with underscore characters ("_").
The values are the file names of the files containing the fonts.
On Windows, simple file names are used; and the runtime environment
looks for each file first in its own lib/fonts
directory, then in the Windows fonts directory. On Solaris and
Linux, absolute path names, path names starting with
"$JRE_LIB_FONTS" for the runtime environment's own
lib/fonts directory, or xlfd names are used.
The Java runtime can automatically determine a number of
directories that contain font files, such as its own
lib/fonts directory or the Windows fonts folder.
Additional directories can be specified to be appended to the font
path.
The key has the form:
appendedfontpath
The value has the form:
AppendedFontPathValue:
Directory
Directory PathSeparator AppendedFontPathValue
The path separator is the platform dependent value of java.io.File.pathSeparator.
There are no platform-specific properties for Windows. However, there is a special form of the character subset name used in search sequences. The name "alphabetic" can take a suffix indicating the character encoding associated with the subset:
alphabeticalphabetic/defaultalphabetic/1252
This information is only used for AWT, not for 2D. The "/default" suffix restricts use of the component fonts for this character subset to the character set of the default encoding; the "/1252" suffix to the Windows-1252 character set. For accessing component font mappings and exclusion ranges, the character encoding suffix is omitted. For all other character subsets, the AWT character encoding is determined internally by the Java runtime.
The AWT text components, which rely on Motif-based peers for text rendering, cannot always use the same platform fonts as other AWT components and 2D. When looking up component fonts for these components, additional keys are recognized. The complete set of keys looked up in this case is:
allfonts.CharacterSubsetName.motifLogicalFontName.StyleName.CharacterSubsetName.motif allfonts.CharacterSubsetNameLogicalFontName.StyleName.CharacterSubsetName
The AWT font path properties specify platform directories which should be added to the X11 server font path. The keys have the form:
awtfontpath.CharacterSubsetName
The values have the form:
AWTFontPathValue:
Directory
Directory : AWTFontPathValue
The directories must be valid X11 font directories. The Java runtime ensures that the directories for all character subsets of a primary search sequence found by the search sequence lookup are part of the X11 font path. The implementation assumes that all logical fonts use the same set of character subsets for a given environment of encoding, language, and country.
